Place an order on 01603 567594 or text 07702 858 622
A Clip Rail track system is suitable to use for pipe sized between 14mm-17mm and are available in 1 metre lengths.
The Clip Rails are secured with a self adhesive backing onto the floor insulation and fixing pins can be used if also needed.
After the Clip Rails are in place, pipework is laid out in the required system design for the building and connected to the underfloor heating manifold.
Once this is completed the pipes are filled with water and pressure tested to confirm the system’s integrity prior to the floor screed being laid.
Contact us on 01603 567594 or email us at email@example.com
- Retains even spacing when laying pipe.
- Clips/Staples available in 40mm or 60mm clips to staple the pipe direct to the insulation board.
- The Screed-Clip® system enables a possible output of 100w/m2 on boilers and 70-80w/m2 on heat pumps in a retro-fit installation.
- Screed-Clip® enables the designer/installer to vary the pipe centres as required. Pipe can be installed at 200mm, 150mm or 100mm centres.
At Orange Heating supplies we pride ourselves on offering a service where we ensure that you have the correct system for your project, we can assist you from conception to completion.
We always keep track of the latest innovations, so we are one step ahead with the latest technologies available.
Our aim is to supply good quality products at reasonable prices, we can offer you flexibility with our in-house Underfloor Heating design service. We will determine the area, zones and materials required for your project.
Our design service will require a copy of your building plans via our contact form, email or post. Once we have received the plans we aim to return them to you including a quotation within 48 hours.